At some point, even our favorite books become worn out and torn apart. You do not need to but another as you can solve this problem right at home. You only need to follow a very simple process, and your books will be good as new. The items required are affordable, and some are even in our homes. This is the procedure of book restoration new jersey.
The first thing is you need to grab the manuscript and align all the pages are they are supposed to appear. This may take a while especially if the pages are old and dog-eared. At a book restoration store, the professionals use a special jig to help the aligning process move along faster. You can use a smooth piece of wood to straighten them out.
Use two scrap wood slats before drilling. As you drill directly into the paper, the outcome may be really messy. This is because the paper is delicate and may get really torn up if the drill is used directly. Make sure that the wood slats are aligned with the edge of the manuscript. This makes it very firm, and it will not easily get torn up again.
After putting the slats in position, you should hold the volume in place using clamps. Make sure that the size of the clamp is proportional to the size of the book. The smallest thickness the clamp can hold may be a lot bigger than the thickness of the manuscript. Medium size clamps help to make the drilling process a lot easier. This is because the book is held in position.
Even when the clamp has held, the manuscript in place, you may need to hold part of the manuscript in order for the drilling to be steady. Since you are aware that your hand will be near the drill, make sure you do not drill all the way on to the other side of the second wooded slat. This is because it is the most likely position of your hand during drilling and you may get really injured.
A press drill should be your first option when drilling. Since you cannot drill all the way to the other side, you should come up with a method of your own. For example, you can leave a space in between two holes. Then you might go to the other side and drill into those spaces. You will be able to maintain some sought of alignment with holes on both sides.
When you are done the drilling. It is time to sew. You are not going to use the normal thread but the strong kind. Like the one used for shoes. You should do this as you move the manuscript clamp and the boards carefully. You should take your time in moving the boards and the clamp because even the slightest movement of the paper means all your hard work will have gone to waste.
For the cover, you can use the old cover but use new fabric on it. You get to choose the color you would like. This brings out your own unique taste. You can also use gold spray on the edge of the pages for the finishing.
The first thing is you need to grab the manuscript and align all the pages are they are supposed to appear. This may take a while especially if the pages are old and dog-eared. At a book restoration store, the professionals use a special jig to help the aligning process move along faster. You can use a smooth piece of wood to straighten them out.
Use two scrap wood slats before drilling. As you drill directly into the paper, the outcome may be really messy. This is because the paper is delicate and may get really torn up if the drill is used directly. Make sure that the wood slats are aligned with the edge of the manuscript. This makes it very firm, and it will not easily get torn up again.
After putting the slats in position, you should hold the volume in place using clamps. Make sure that the size of the clamp is proportional to the size of the book. The smallest thickness the clamp can hold may be a lot bigger than the thickness of the manuscript. Medium size clamps help to make the drilling process a lot easier. This is because the book is held in position.
Even when the clamp has held, the manuscript in place, you may need to hold part of the manuscript in order for the drilling to be steady. Since you are aware that your hand will be near the drill, make sure you do not drill all the way on to the other side of the second wooded slat. This is because it is the most likely position of your hand during drilling and you may get really injured.
A press drill should be your first option when drilling. Since you cannot drill all the way to the other side, you should come up with a method of your own. For example, you can leave a space in between two holes. Then you might go to the other side and drill into those spaces. You will be able to maintain some sought of alignment with holes on both sides.
When you are done the drilling. It is time to sew. You are not going to use the normal thread but the strong kind. Like the one used for shoes. You should do this as you move the manuscript clamp and the boards carefully. You should take your time in moving the boards and the clamp because even the slightest movement of the paper means all your hard work will have gone to waste.
For the cover, you can use the old cover but use new fabric on it. You get to choose the color you would like. This brings out your own unique taste. You can also use gold spray on the edge of the pages for the finishing.
About the Author:
You can find a list of the advantages you get when you use book restoration New Jersey services at http://www.bythecpress.com right now.
No comments:
Post a Comment