Glass carving is an artistic technique used for inscription of creative designs as well as symbols. There is a technique known as sand-carving that was developed in the late 19th century and is used for creation of multilevel abrasive etchings on glasses. After etching of the design into the glasses, there is addition of light and shadow details. In considering glass carving Alberta residents should appreciate its uses; creation of gemstone, windows, sculptures and more.
For people that are looking to carve glasses, there are 3 main components that they will require. These are an acid based cream for etching, foam brush and stencils. The first step is to place the pieces to be used on a flat surface after which they are sprayed with a cleaner. It is very essential that the cream used for etching adheres properly to the surface. This explains why the surfaces used have to be not only clean but also dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
Majority of people appreciate carved glasses. One is likely to see the carvings in gift shops, glasses and fancy windows. Not many people are involved in the activity, hence it could be very profitable as a business. Most people cherish the sight of the carvings. In fact, it becomes more fun for those that are doing it for fun.
For those that look to do the business of glass carving Alberta offers the perfect environment. One will need to have 3 main things to begin the business; resists, a studio that is well lit and a blast cabinet. With the right marketing, one is bound to benefit greatly.
For people that are looking to carve glasses, there are 3 main components that they will require. These are an acid based cream for etching, foam brush and stencils. The first step is to place the pieces to be used on a flat surface after which they are sprayed with a cleaner. It is very essential that the cream used for etching adheres properly to the surface. This explains why the surfaces used have to be not only clean but also dry.
After being cleaned, the surface is wiped with soft cloth so that it dries up before one continues. One has to choose the design that should be carved. Most experts in art and craft recommend stencil since it has an already existing design. There are stencils that come with adhesive backing to make them adhere completely to the piece. The back is pulled off the stencil as it is held down firmly for some seconds.
As a safety measure, one should put on goggles and latex gloves. There are fumes produced from the cream that are strong and have different effects on people. For people that have sensitive eyes, putting on goggles is advisable; otherwise there are chances that they will be adversely affected. Allergy to latex requires one to use vinyl or rubber gloves.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
Majority of people appreciate carved glasses. One is likely to see the carvings in gift shops, glasses and fancy windows. Not many people are involved in the activity, hence it could be very profitable as a business. Most people cherish the sight of the carvings. In fact, it becomes more fun for those that are doing it for fun.
For those that look to do the business of glass carving Alberta offers the perfect environment. One will need to have 3 main things to begin the business; resists, a studio that is well lit and a blast cabinet. With the right marketing, one is bound to benefit greatly.
About the Author:
You can visit the website www.claudegarneaustudio.ca for more helpful information about Procedures Involved In Glass Carving Alberta
No comments:
Post a Comment